The development trend of packaging scale automation is becoming more and more obvious

From the perspective of the development process, domestic particle packaging scales have not blindly followed the pace of others. As the development continues, the development trend of packaging scale automation is becoming more and more obvious, and it has gradually become an important role in the industry. In fact, the equipment is mainly aimed at small particle products, but there are also some powder products that are also applicable.

Therefore, from the perspective of use, packaging scales have brought great convenience to many enterprises. Especially with the birth of fully automated packaging equipment, it has brought us a lot of help. This also reflects from the side, in fact, with the development, the equipment has gradually entered the ranks of automation, thus bringing a lot of convenience to major manufacturers.

Everyone should know that with the improvement of the automation level of packaging scales, the production operations of manufacturers will become more concise and clear. At the same time, due to the advanced technology, the packaging quality is guaranteed. Especially for large-scale manufacturers, the higher the automation level of the equipment they use, the higher the work efficiency, and the more benefits they get.

Because it can not only significantly improve the packaging speed of the enterprise, but also significantly increase the daily output of the enterprise. Therefore, to a certain extent, the automatic particle packaging scale greatly meets the needs of large enterprises. Similarly, for small enterprises, full automation can also save a lot of labor costs and management costs.

In general, we hope that the domestic packaging scale industry can continue to innovate. Only continuous innovation can have proud achievements. Therefore, manufacturers of particle packaging scales must adhere to continuous innovation and move towards automation in an all-round way.

During the operation of the electromechanical integrated feed machinery, some problems will inevitably occur due to the influence of certain factors. We will summarize some of the more common problems to help you analyze the reasons together, and will give possible solutions. Suggestions for reference, hope to help everyone.

A relatively common problem is the problem of material accumulation in the feed port of the pulverizer in the feed processing machinery. The main reason for such a situation is that when feeding, the feeding amount is too large, which causes the processing of the feed pulverizer to be unable to keep up, blocking the screen and the suction pipe. If such a problem is found, the pulverizer should be shut down immediately, and all accumulated materials should be removed, the suction pipe should be unclogged, and then the feed amount of the pulverizer should be readjusted.

The feed processing machinery made abnormal noise during operation. Such a problem usually occurs because a large hard substance enters the inside of the equipment, or some parts inside the equipment fall off, resulting in abnormal sound during operation. At this time, the equipment should be shut down in time, and then find out the specific cause and deal with it.

After mechanical treatment of feed processing, the particle size of the obtained batch material particles is too coarse. In this case, the screen is usually worn or hit by foreign objects, and holes appear to cause particle sieving, or the screen and the screen edge are not tightly fitted, resulting in screen leakage.

A relatively common problem is that during the operation of feed processing, a large amount of dust appears in the operation workshop. This situation is likely to be due to the fact that the mouth of the dust bag is not tightly sealed, or the joints of the conveying pipe are not tightly sealed, resulting in dust spillage. The parts of the above processing equipment should be checked and dealt with in time.