Correct operation of automatic quantitative packaging scales saves time

Correct operation of the automatic packaging scale can not only save time, but also reduce the possibility of machine failure, promote it to improve the efficiency of work, and in a certain sense, it can also extend the service life of the electronic packaging scale. How much do you know about the method? The following editor will explain to you how to use the automatic packaging scale.

For users, no matter what type of particle quantitative packaging scale equipment is used, they may encounter a very difficult problem during actual work, that is, material blocking. Once the problem of material blocking occurs, it will affect the entire packaging work. So what should I do if the particle quantitative packaging machine is blocked? Below we share some tips and hope to help you solve this problem.

Of course, before taking specific measures, we need to analyze the specific situation first, and then choose appropriate measures according to the situation. Under normal circumstances, there are two kinds of material blocking problems of particle quantitative packaging scale equipment. The first one is the extrusion-type material blocking problem. Then the solution to this problem is: increase the pressure of the fluidized gas source, or switch to Clearance mode, so that it clears the discharge pipeline, basically the problem can be solved.

And if there is a problem of blockage of large pieces of material, it will be more troublesome to deal with. If there is no suitable solution for the time being, then it is necessary to shut down the quantitative particle packaging scale first, then open the air supply device, or open the cover plate of the fluidization silo to take out the agglomerated materials, and then repackage them.

Of course, in addition to these factors, it may also be due to some problems with the particle quantitative packaging scale equipment we use. If we find that the problem of material blockage often occurs during packaging, then we can consider replacing the new equipment. It is recommended that you choose equipment with advanced self-weight three-stage optional vibration feeding function, which can not only improve the packaging speed, but also effectively prevent material blocking during feeding.