High-quality electromechanical integrated feed machinery can complete production work more quickly

In the production process of electromechanical integrated feed machinery, the crushing process is a very critical process. As far as the current production is concerned, according to the different times of crushing of raw materials, it can be mainly divided into primary crushing process and secondary crushing process. Among them, the primary crushing process is simple and the equipment investment is low, but its disadvantage is that the processing result of the crushed material may have uneven particle size and high power consumption.

And another crushing process can make up for this deficiency. Using this process, the finished product processed by the feed processing machinery has the same particle size, high output, and low energy consumption, but its equipment investment is large. Therefore, most of the feed mills currently use a crushing process. In compound feed, pellets generally account for 60%-70%. When choosing a pulverizer, the production capacity of the pulverizer is generally greater than the production needs of the feed factory, and the time saved is used for maintenance and replacement of wearing parts.

It should be noted that in order to complete the production work more quickly, it is generally necessary to prepare at least two warehouses to be crushed in advance. If there are many varieties of pellets, it should be increased appropriately. Under normal circumstances, its storage capacity should not be less than the 2-4 hour output of the feed processing mechanical pulverizer, so as to reduce the number of start-ups of the pulverizer.

In addition, it should be considered that the feeding device used for crushing pellets is very important during the operation of feed processing machinery. For small feed mills with low degree of automation, manual gates are often used to control the feeding amount. Large-scale feed mills often use impeller-type or screw-type automatic control feeders, whose rotational speed can be adjusted, and the feeding amount can be changed. input.

At the same time, in the production system, it is also necessary to match the appropriate batching warehouse. Generally speaking, it is necessary to set up conveying equipment on the top of the batching silo. The conveying equipment includes two types of rotary distributors and screw conveyors. The main function is to accurately distribute the crushed materials and the auxiliary materials that do not need to be crushed. The workshop space is required. Higher, but can avoid cross-contamination.