There are many detection methods for quantitative packaging scales

The emergence of quantitative packaging scales provides a lot of convenience for the packaging of materials, but it is also necessary to ensure that the packaging scales can be used normally and accurately, so we have to talk about the lubrication of the packaging scales. Without this operation, the function of the packaging scale will not be fully utilized, and even the parts may be damaged. For the packaging scale, how to lubricate each part of it?

Packaging scale is a commonly used packaging weighing equipment. The most important thing in use is weighing accuracy. For this reason, a packaging scale will be tested before it is put into use. There are also many detection methods for packaging scales, and it remains to be understood which one is better to choose.

If you want to save time and effort, the chain code calibration detection method is usually used to test the packaging scale. As long as the cyclic chain code is used to simulate the material, the performance of the equipment can be verified, and the final accuracy error is not very large. Of course, in terms of accuracy, offline physical detection is ideal, but it is more troublesome in material collection.

In addition, there is also a method of checking the code, which uses the simulated material to detect the packaging scale. This is the lowest precision among all the detection methods, so it is not recommended for everyone to use it. In fact, the online physical detection packaging scale is a detection method with good accuracy, but it requires a relatively large cost, which limits the promotion of this method.

When lubricating the packaging scale, it is important to pay attention to details. For example, when adding lubricating oil, do not drip it on the drive belt, which may cause the belt to slip, and even make the parts prematurely damage. Secondly, the addition of lubricating oil should be comprehensive, such as gears, bearings, oil injection holes and other parts that need to add lubricating oil, and it takes a long time to see the effect.

Another point that cannot be forgotten is the lubrication of the reducer of the packaging scale. This part of the device cannot run without oil. And if it is a new reducer, it needs to be cleaned and replaced after running slowly for a certain period of time to ensure a good lubrication effect.