There are many parts of the quantitative packaging scale that need to be cleaned

Timed lubrication of quantitative packaging scales:

During the use of the quantitative packaging scale, good lubrication care is one of the essential conditions to ensure the normal operation of the equipment. Therefore, we have to do a good job of lubricating and imitating protection according to specific requirements. 1. We should regularly add oil lubrication to the meshing parts of the gears, the oil injection holes of the bearing with seats and the moving parts; 2. Ensure that the reducer is fully lubricated during operation. When adding lubricating oil, be careful not to drip on the transmission belt .

The packing scale should be cleaned in time after use. Every time you use the quantitative packaging scale, you should develop a good habit of cleaning it in time. That is to say, after each work, we should clean up the work site in time, and carefully clean the weighing part of the equipment to ensure its weighing accuracy. If there are scattered materials, they should be cleaned up in time, and all parts of the equipment should be cleaned to prolong the service life.

The maintenance requirements should be paid attention to if the packaging scale is not used temporarily or before use. We should pay attention to the inspection work, especially on the packaging scale equipment.

Cleaning matters of packing scale:

1. There are many parts on the packaging scale that need to be cleaned, and cleaning opportunities are also critical. After completing the packaging and weighing operation, the first thing to clean is the weighing part of the packaging scale, such as the unloading tray, turntable, etc. corrosion.

2. There is a high-tech component on the packaging scale, which is also the focus of cleaning, such as the photoelectric tracking light-emitting head. Keeping clean will help reduce the error of cursor tracking.

3. For the materials scattered on the packaging and weighing tray, it may be cleaned in time, and the parts spray cleaning machine should be kept clean.

4. At the same time, the dust in the electric control box should be cleaned regularly to prevent problems such as poor contact.