It will have different degrees of influence on the dynamic production process of feed machinery.

The routine preparations before the feed machinery production operation mainly include:

1. Prepare before starting the machine, check and replace the ring die and screen of the feed machine according to the formulated production plan, understand the steam supply, clean the residual material in the granulator, remove the condensed water in the modulator pipeline, clean the cooler, Overhaul and maintain the granulator to ensure the normal operation of the granulator.

2, boot safety. It is usually notified by the production scheduling room to start the machine. When the feed machine is turned on, the latter process is usually started first, and then the former process is started. When the main machine is turned on, it is necessary to wait for the Y-△ depressurization to turn on and then turn on the feeder. .

3. During the operation of the feed machinery, attention should be paid to the observation of various control instruments, and the feeding speed, steam pressure, tempering temperature, steam addition amount and cutter distance should be properly adjusted according to the actual production situation. In order to ensure that the quality requirements of the product production process are met and recorded.

4. Stop. After the production operation is completed, when the feed machinery needs to be shut down, the former process should be closed first, and then the latter process should be closed. Before the shutdown, oily plant material should be used to fill the die holes to avoid material blockage. At the same time, it is necessary to clean up the residual materials in the feed machinery granulator, clean up the equipment site, and clean it.

At present, in the production of feed machinery, people pay more and more attention to the standardization and process of work. In fact, standardization will have a larger impact on feed costs. In addition, the standardized production process, the formulation of cost standards for each project, the assessment of cost standards, the implementation of work instructions, the establishment of cost centers, the improvement of table systems and process regulations are all important influencing factors.

That is to say, these factors will have different degrees of influence on the dynamic production process of feed machinery, thus affecting the final production cost. Secondly, the processing technology used also has a very important impact on the cost of feed. Comparatively speaking, the impact of feed processing technology level on feed cost includes many aspects.

It often involves many links in feed machining, such as crushing, compounding, granulation, puffing, etc. In addition, the formulation of process regulations, the use and adjustment technology of key process equipment, equipment maintenance technology, steam system transformation technology And ventilation and dust removal technology will also have an important impact on feed costs.