What are the main routine preparations before the production of electromechanical integrated feed machinery

Regarding the production purpose of the electromechanical integrated feed machinery, it can be mainly understood to further improve the quality of feed products in the pelleting process and ensure that the feed products meet the requirements of feed technology. In order to achieve this goal, it is necessary to first determine the suitable feed machinery, and at the same time make corresponding preparations.

The routine preparations before the feed machinery production operation mainly include:

1. Prepare before starting the machine, check and replace the ring die and screen of the feed machine according to the formulated production plan, understand the steam supply, clean the residual material in the granulator, remove the condensed water in the modulator pipeline, clean the cooler, Overhaul and maintain the granulator to ensure the normal operation of the granulator.

2. Safe booting. It is usually notified by the production scheduling room to start the machine. When the feed machine is turned on, the latter process is usually started first, and then the former process is started. When the main machine is turned on, it is necessary to wait for the Y-△ depressurization to turn on and then turn on the feeder. .

3. During the operation of the feed machinery, attention should be paid to observing the various control instruments, and the feeding speed, steam pressure, tempering temperature, steam addition amount and cutter distance should be properly adjusted according to the actual production situation. In order to ensure that the quality requirements of the product production process are met and recorded.

4. Shut down. After the production operation is completed, when the feed machinery needs to be shut down, the former process should be closed first, and then the latter process should be closed. Before the shutdown, oily plant material should be used to fill the die holes to avoid material blockage. At the same time, it is necessary to clean up the residual materials in the feed machinery granulator, clean up the equipment site, and clean it.

When selecting pelleting feed machinery, the main types of pelletizers currently used include ring die and flat die. Among them, the flat die is more suitable for the granulation of roughage, so only the ring die granulator is explained. Usually the working mechanism of the ring die granulator is roughly the same, so the judgment of its performance during the selection is mainly based on whether the structural design is reasonable, whether the operation is convenient, the selection of structural parameters, processing methods, manufacturing level, parts selection, A comprehensive judgment is made in terms of purchasing channels and control functions.