Also have some knowledge about the daily maintenance of electronic packaging scales

Electronic packaging scales are still widely used in industrial production, and there are many bad ones. The daily maintenance knowledge of electronic packaging scales should also be mastered, so as to reduce the failure rate of electronic packaging scales and improve the packaging of products. Efficiency and packaging precision.

If the meter of the electronic packaging scale does not display the weight value after it is turned on, but displays the time, it means that the meter has not received the data sent by the scale body. Please be sure to check the A/D of the scale body to see if it is powered on or if the battery voltage is insufficient. If the data cannot be received within 10 meters, it is necessary to further check whether the antenna of the scale body is in good contact, and if it is damaged, it must be replaced in time.

Seeing that the electronic packaging scale displays an error when it is turned on, and the buzzer continuously emits an alarm sound during weighing, it indicates that the weighing value has exceeded the set weight limit value, and it can only return to normal after the load is reduced. If it does not display directly, the battery of the meter may be damaged or insufficient, and it still cannot be turned on after charging, please replace the battery.

Although these are very detailed knowledge, they are all common symptoms in the use of electronic packaging scales. After mastering, you can repair them yourself, so that the electronic packaging scale can return to normal as soon as possible.

1. Cleaning matters of packing scale.

1. There are many parts on the packaging scale that need to be cleaned, and the timing of cleaning is also critical. After completing the packaging and weighing work, the first thing to clean is the weighing part of the packaging scale, such as the feeding tray, turntable, etc. corrosion.

2. There is a high-tech component on the packaging scale, which is also the focus of cleaning, such as the photoelectric tracking light-emitting head. Keeping it clean will help reduce the error of cursor tracking.

3. For the materials scattered on the packaging and weighing pan, it may be cleaned in time, and the parts spray cleaning machine should be kept clean.

4. At the same time, the dust in the electric control box should be cleaned regularly to prevent faults such as poor contact.

2. Maintenance of packing scales.

1. For the newly installed packaging scale, after using it for a period of time, do not forget to check and refuel the various transmission and moving parts to ensure their tightness and lubricity.

2. At the same time, check the screws of all parts of the packaging scale regularly to avoid loosening.

3. For the electrical part of the packaging scale, the maintenance focus is on waterproof, moisture-proof, anti-corrosion, etc., so as to avoid electrical failures.

4. Even when the machine is shut down, attention should be paid to maintenance. The two heat-sealing rollers should be in the open position to prevent the packaging materials from being scalded and affecting the packaging quality.

The above is about all the cleaning and maintenance matters involved in the electronic packaging scale. If there are any omissions, you are welcome to add them.