Packing scales pack products quickly and consistently

Due to various considerations, packaging scales are usually introduced to enterprises. The use of bucketless packaging scales can save space and provide options for the transformation of old workshops. However, the speed of the bucket without scale is worse than that of the bucket with scale. When choosing, consider it as appropriate. For the selection of packaging scales, practicality is very important, but on-site installation is also very important.

During the whole use period, the weighing accuracy should be ensured first, which is directly related to the level of the silo on the packaging scale and the fluctuation of the feed flow caused by the change of the material pressure.

The granular material with good fluidity is more obvious than the powdery material with poor fluidity; the smaller the storage capacity of the silo, the greater the impact. Using secondary buffering, on the premise that the silo has storage capacity, a secondary buffer hopper is added between the silo and the feeding port of the packaging scale, with a capacity of 2 bags of weighing weight. The buffer hopper and the feeding port of the packaging scale are connected with a handwheel gate to adjust the flow rate, and it is also convenient for the packaging scale to close the gate during maintenance, so that the material in the silo or buffer hopper cannot flow down.

In the field of packaging, many people will use packaging scales, which can pack products quickly and stably. The appearance of packaging scales can be used on assembly lines to improve packaging speed and quality. When the packaging scale is used for a long time, the electromagnetic power may drop.

Internal failure of the host, or line interruption. Find the source of the problem, check whether there is any abnormality inside the host, whether the line is interrupted, find the source of the problem, and repair and replace it in time.

The electromagnet fuse is not energized. If the electromagnet fuse is no longer energized, it means that the electromagnet coil may be blown, and the coil should be replaced.

Internal power supply and wiring. It is found that the internal power supply cannot supply power normally, or it is good or bad, it is recommended to check the circuit. Line interruption is also a major reason for the decrease in the electromagnetic attraction force of the packaging scale.