新闻资讯

新闻资讯

current position: Home > News Center > Industry News

Basic requirements for daily maintenance of quantitative packaging scales

2021-06-22 15:56:39
times


Regularly check the screws of various parts of the packaging scale to avoid loosening; at the same time, pay attention to the waterproof, moisture-proof, anti-corrosion, and rat-proof of the electrical parts; the electric control box and the terminals should be kept clean to prevent the electrical failure of the packaging scale. If it needs to be stopped, the two heat-sealing rollers of the packaging scale should be in the open position to prevent the packaging materials from being scalded; as well as the meshing parts of the gears of the equipment, the oil filling holes of the seated bearings and the moving parts, oil should be regularly lubricated.


One of the professional maintenance contents of the particle packaging scale is the cleaning of the rotating drum. When the equipment is running, the rotating drum will inevitably be contaminated with or remain a certain amount of dust or particulate materials. Take it out from the packaging scale, carefully remove the dust and impurities on it, and re-install the rotating drum after it is completely removed.


As a special packaging and weighing equipment, the packaging scale must be operated by fixed personnel, and the staff are required to be proficient in the startup and bag making procedures, simple instrument debugging, changing parameters, etc. The basic requirement for the daily maintenance of the packaging scale is to ensure that the inside and outside of the computer instrument box is clean and dry; in addition, it is also necessary to regularly check that the terminals are not loose or fall off to ensure that the circuit and gas path are unblocked.


After the packaging scale is shut down, the metering part should be cleaned in time. If the packaging is sugar, Banlangen granules, salt, etc., it is necessary to ensure that the feeding tray and turntable are cleaned every shift so that they are not corroded. The heat sealer body of the packaging scale should be cleaned frequently to ensure a clear texture of the seal.


The main points to be cleaned are the photoelectric tracking light-emitting head of the packaging scale, the scattered materials on the material tray, the dust in the electric control box, etc., to ensure the small error of the cursor tracking, keep the parts clean, and prevent the electric control box from being in poor contact. wait for failure. The transmission and moving parts of the packaging machine must be inspected, tightened, refueled and maintained within a week of use; after that, it must be regularly inspected and maintained every month.


Tags

Recently Viewed:

Related products

Related news

Leave your valuable suggestions

Submit

Yangzhou Liding System Engineering Co., Ltd

Add: No.20, Innovation Park East Road, Jiangyang Industrial Park, Hanjiang District, Yangzhou City

Tel: 0514-82123948

Mobile: 13805278236  13665278636

Fax: 0514-82123981

E-mail: wbtot@163.com

Website: www.china-leading.com.cn


X

Leave your valuable suggestions

* name

* contact

* content

After receiving your consultation message, we will contact you as soon as possible
Technical Support:YichengNetwork
#
在线客服

x