Raw material cleaning is very important for both process and feed machinery

In the market of feed machinery, not all products are qualified and high-quality, and there are also some inferior products that want to get away with it. If the user does not know how to distinguish, it is very likely to buy such equipment. What is the quality of this type of feed machinery?

The first is safety. In order to save costs, even if corresponding protection devices are installed in the equipment, it is still imperfect or has hidden quality problems. Secondly, it may be that the quality of the produced feed products is poor, and it may even fail to operate normally. For example, when the material selection of the ring die, pressing roller, cutter and other components of the pellet mill is unreasonable, or the heat treatment is not appropriate, their lifespan will be shorter. It is very limited and cannot guarantee the normal use of the equipment and the production of the product.

In addition, the power consumption of the machinery is large and the working noise is high, which will not only increase the user's production frequency, but also pollute the environment, which are caused by the poor processing and assembly quality of the parts and components of the feed machinery. You say, can such a device work? In the process of feed processing, due to the influence of various factors, there will be undesired phenomena such as blockage and poor feeding path. It can also be proved that the cleaning of raw materials is very important for the process and feed machinery. In the end, which devices can play a role in cleaning the feed machinery?

In the initial stage of feed processing, a reasonable grid screen will be set up as a part of the cleaning process. The size of the grid screen gap should be determined according to the geometric size of the material, so that the sample can achieve the purpose of preliminary screening. The material after preliminary screening will enter the next cleaning process, which is the initial cleaning cylinder. Since its process parameters will have a direct impact on the cleaning effect, it must be set reasonably.

During processing, iron nails, bolts, nuts, small iron pieces and other impurities are also mixed in the feed, which is very harmful to the feed machinery. In order to remove these magazines, magnetic separation equipment can be equipped and set in a reasonable position, so as to exert the effect.