Generally, equipment-related cleaning equipment is used in feed machinery.

Because the prepared feed is easy to remain in the feed machinery, and various impurities will be mixed in the processing process, which will affect the later use of the equipment. Considering this reason, the equipment-related cleaning equipment in the feed machinery is generally used. for the removal of impurities and products. What types of cleaning equipment do you usually come into contact with? What is the effect of using it in feed machinery?

The grid screen can be said to be a simple cleaning equipment in the electromechanical integrated feed machine. It only uses a few steel bars to be welded, so its function is relatively limited, and it can only be used to prevent large mud blocks, stones, etc. Impurities enter the feeding port. Because of this, the grid screen is often used as the cleaning equipment of the feed machinery, and is set at each feeding port.

The main cleaning equipment should be a cleaning sieve. The types of cleaning sieves used are different according to different raw materials. For example, a cylindrical initial cleaning sieve is not suitable for powder materials, and such materials should be cleaned by a conical powder cleaning sieve. The plane rotary vibrating screen has a good cleaning effect on granular raw materials and powdered raw materials, and removes larger impurities.

In addition, the magnetic separation equipment is also one of the cleaning equipment configured in the feed machinery, and the permanent magnet equipment is mostly used. The above cleaning equipment of the feed machinery can well maintain the device and avoid the impact of impurities and reduce the operation. Efficiency is also to provide strong protection for feed machinery. All types of feed machinery are basically powered by electricity to drive the equipment to run, but in many cases oil transmission is also one of its indispensable driving methods. It can be seen that, in addition to electricity, for the fast and stable operation of the feed machinery, the role of oil as the power supply of the equipment is also particularly important. Once the machine does not produce oil, it should be repaired in time.

First of all, check whether there is any material residue in the feed machinery, especially in the gap between its main shaft and rotor; secondly, remove the filter screen of the oil filter in the machine, and carry out careful cleaning to avoid impurities blocking the mesh holes. hinder the filtering effect. Next, the grease block of the feed machine must be disassembled, the main purpose is to clean the impurities that have been inserted into the oil hole.

In addition to the above operations, the refueling part of the equipment should also be checked. If the oil leakage is serious, it will also cause the oil in the machinery to be unable to be supplied normally, thus affecting the normal operation of the equipment.