Appropriate maintenance space should be reserved when the packaging scale is installed

The packaging scale is different from ordinary weighing instruments. It is a device that can continuously weigh and pack. Although its structure is simple, it should not be sloppy during installation. At least the following requirements must be complied with, otherwise the weighing accuracy and packaging quality cannot be guaranteed.

When installing the packaging scale, make sure that the longitudinal center of its receiving section coincides with the center line of the material flow in the silo, and that the material flow is naturally accumulated and evenly distributed on both sides of the center line of the receiving section of the equipment, so that the height of the material flow is not equal. Diffuse is the basic principle. If the disc feeding method is used, make sure that the disc discharge drop is not greater than 200mm, and cannot be in contact with any part of the scale.

If it is changed to the drag feeding method, the feeding nozzle cannot contact with the scale body, and the lower end must keep a certain distance from it. In order to facilitate later maintenance and repair, appropriate maintenance space should be reserved when the packaging scale is installed. In short, in order to ensure the accuracy of packaging measurement results, the following requirements must be strictly followed, which is also to prolong the service life of the equipment and improve its work efficiency.

The emergence of machines can replace people to do a lot of heavy and complicated work, which brings great convenience to people. The packaging scale is a packaging weighing equipment developed under the impetus of market demand. This type of equipment has gone through many stages from its development to the present, and the types of products have also been upgraded and optimized, which is enough to show that the industry is changing very fast.

You can imagine that the packaging of any product can be simplified, practical, automated, and intelligent, and all this can be achieved only by a special equipment - a packaging scale. With automated and intelligent equipment, packaging operations do not need to be considered operations, and production efficiency and productivity have greatly improved.

No matter how the packaging scale is changed, these basic components are indispensable, including packaging components, control boxes, weighing systems, conveying equipment, etc. The purpose is to make the packaging of products easier and to greatly improve production efficiency. At the same time, the calculation accuracy has also been greatly improved to meet the packaging requirements of different products.