The technical content of the automatic quantitative packaging scale is naturally very high

The feeding device of the packaging scale can be effectively divided into two feeding methods: fast and slow. When in use, the material in the weighing hopper finally reaches the preset value, and the conveyor belt will automatically stop conveying the material, which means that the equipment will automatically shut down. its feeding door.

The packaging scale system detects whether the bag clamping device is in its predetermined state. When the packaging bag is clamped, the system will send its control signal to open the weighing hopper discharge door, and the material will enter its packaging bag. The discharge door of the weighing hopper closes automatically.

The range of use is very wide. The materials that can be effectively weighed include fertilizers, food, grain, and other wood pellets or coal blocks. After the equipment enters the state of poor automatic operation, the control system in the equipment effectively opens its feed The feed gate starts feeding.

The feeding device in the electronic quantitative packaging scale can be directly divided into two feeding methods: fast and slow, but when the material weight reaches the set value of fast feeding, it is necessary to effectively stop fast feeding and effectively maintain its slow feeding. , when the material weight in the equipment reaches the final set value, close the feeding door to complete the dynamic weighing process.

The packaging scale is a very good machine, which is widely used in the packaging requirements of many industries. Now the product is mainly used in the process of using automatic instruments to quickly package the items, and the packaging scale will automatically weigh, Sewing, conveying and other devices can be effectively controlled according to its computer.

Among various packaging scale products, quantitative packaging scales are mostly used because it can bring users accurate packaging effects. To achieve this goal, in addition to the quality of the equipment, the packaging parameters of the quantitative packaging scale must be correctly set.

The technical content of the automatic quantitative packaging scale is naturally very high, but even so, problems will still occur. Typically, the upper and lower arc doors of the packaging scale will be closed at the same time, thus hindering the normal operation of the equipment. Does the technician have a solution to this problem?

First of all, we must analyze the cause of this failure. On the one hand, it may be caused by the ineffectiveness of the buffer cylinder of the automatic packaging scale, and on the other hand, it has a certain relationship with the length of the weighing time. If the buffer bolt is too short, the buffer cylinder will fail. In this case, the bolt needs to be adjusted to a reasonable position, excluding the microswitch being turned off due to impact after rough feeding.